Jump to content

Unilogic Value not displayed


Recommended Posts

Hi,

I have configured numeric entry field in the HMI and I am entering time in minutes. When I change this value by entering it from HMI, it works. 

But when I pass the value to this tag from the logic, updated value is not displayed on the HMI.

Here is the screenshot of the logic created to pass the default value to the time setpoint. 

Please help.

image.png.f802e81429ece759f427e3b881693edb.png

image.png.bbe4e82d2fd77b1c3ec4522917ad4d2b.png

 

Link to comment
Share on other sites

  • MVP 2023

You have not given us enough information to help you. Some items to check:

Are you certain you are storing the new value to the PRESET?

Are you certain you are calling the subroutine this ladder rung is in?

Do you see the Preset change in ladder when you are online?

Your best help will come if you post your program here.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...