Jump to content

Recommended Posts

1. Project is not erased.

2. Reset equivalent to power cycle.

3. Initialize & Reset clean ALL memory registers and make Reset.

*&Data Tables are not affected by Reset, nor by Initialize & Reset.

You can find all this information in Help file.

B.R.

 

Link to post
Share on other sites

To make it a bit simpler: Reset is a soft boot - exactly the same as power cycling without having to remove power. Nothing is lost.

Initialize & reset erases the values in all the memory registers (MB, MI, ML, etc). It does not affect any other aspect of the PLC (program, data tables, etc are retained).

Of course if there are any power-ups in the program, the initialized registers will obtain those values immediately after the reset.

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...