Jump to content

Recommended Posts

Hello,

I have a samba sm43-j-r20 plc using hsc0 connected to the pulse output of a micro motion IFT9703 transmitter.  I am supplying 24vdc to the transmitter output as it is passive, same source powering plc, and have been able to simulate and see counts on plc.  my problem is that I am seeing extra unwanted pulses when I press buttons I have tied to the inputs and also when ever I engage the output that enables a relay controlling a conveyor motor or any output by that matter.  how can i prevent this from occurring so i can see the true pulse output from my transmitter?

Thank You

RL  

Link to post
Share on other sites

Hi,

When use mechanical switch, then it's contact(s) "bounce" when fast change it's position.

Normal Digital Input has internal filter, which "neutralize" contact(s) bouncing.HSI has no such filters.

You can use button on PLC display to start timer and generate fixed length output pulse.

Use this pulse as input for high speed counter.

Then everything should work as supposed.

B.R.

 

  • Like 1
Link to post
Share on other sites

I recommend to set samba input to npn mode by jamper. 

In NPN  mode you can use only two wire for connect IFT9703.  

825656263_NPNmode.JPG.8b66ce85e5360f9cd4ce2c3a199cd391.JPG

 

Please note all output coil with 24 VDC must be suppressed via clamp diode. AC coils suppressed via RC - filter.

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...