Jump to content

Unistream Public IP Address


Buddy123

Recommended Posts

I fired up a UniStream to see if DHCP was an option - it is not.  The IP address of the panel (which does the heavy lifting) is set in the project definition.

If you want to see the panel IP value, look in under System->General->Panel IP Address.  Then I tried to access this variable and put it on the screen and found it is not part of the System Data struct.  I got the same result when I tried to access it via the ladder editor.  So it's there, but we can't seem to access it.

I think you are out of luck.  I would ask this question officially by sending a request to support@unitronics.com.  Let us know what you find.

Joe T.  

Link to comment
Share on other sites

Hi;

 

Under Screens,  Numeric Elements, there are 2   IP Address  Options

            IP Address Edit   -- you can select which IP Address to  view and edit   ( IP Address Type)

           IP Settings Edit  --   Panel, CPU, DNS  -- View and edit

These are all editable from the screen

 

   In the Ladder  - Strings   --  IP to String    and        String to IP    ( no info in Help for explanations)

       IP to String       allows an  ASCII   Variable

     ASCII to String  -- does not allow setting a Panel IP  -- from what I can see.

 

    ( Don't have  UniStream to play with  right now  - else I would test them out )

 

DanT

 

 

 

      

Link to comment
Share on other sites

@DanT - I did see the screen object edit choices but I didn't  think about the IP to string function.  Which is dumb of me because I use that in Vision.  Good thing your brain is engaged!

@Buddy123 -  That made me dig a little deeper into the system variables, and I found my first post to be in error.  I was expecting the IP information to be in the System Data struct, but it's actually in the General struct.  So I need to bone up on UniLogic system names.

Using the system tag "General.Panel IP Address" as a source you can indeed save off the IP address.  I've attached my test project.

Joe T.

 

7 inch IP test.ulpr

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...