Jump to content

Add ( one or more) remote display and control of existing V350-35-TA24


Recommended Posts

Customer has requested the ability to set, and monitor the temperature at remote station(s)/location(s) on a printing press.
Any simple way to do this using another V350xxx  without a major programming effort???

Basically want to duplicate the buttons and display, and have them work in parallel with the existing full control.
Serial connection ok, or?
 

 

Link to post
Share on other sites

Joe recommended this to me awhile back and it works great. Added plus that you can use teamviewer to get into visilogic  and the plc easily. Often hard to deal wit IT to have access to the network. This way I just install a touchscreen laptop as a secondary screen and connect to wifi as a guest. No company sensitive info is accessible, but you have easy access to the plc. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...