Jump to content

PID - P1 is working and i can allow changes to control value but P2 is working but will not changes to control value - It is READ ONLY


Recommended Posts

Help me guys please

 

I have two control loops PID P1 and P2

P1 is working fine and it has logic to store 0 to  "control value"  without compiler faults

P2 is working fine but it wont allow store 0 to  "control value"  , system  responds  compiler "tag is read only"

Now i am thinking that P2 is wrong so i create a P3 and its the same P2 but it wont allow store 0 to  "control value"  , system  responds  compiler "tag is read only"

when i duplicate P1 to  P11 ,  the P11 acts the same as P1 and it compiles ok and store 0 to "control value"  without compiler faults

 

Now i am sure the logic should not allow me to store 0 to "control value" and the compiler  is right but why does it work fine on P1 but it wont work on P2

image.thumb.png.bb0ab796b9f539ce1d57057e0951594a.png

Link to comment
Share on other sites

Hello @hamfam,

The member "control value" is actually supposed to be read-only.

When reopenning your project, and compiling with "Rebuil All", does the assignment still pass compilation?

Did you create P1 and P2 at about the same time?

I guess any "PID config" struct that you create from now and then gives a compilation error on such an assignment, right?

I suggest you to send your project to R&D (through support), it looks that the P1 tag is somehow corrupted. (you don't really have to, if you wish, you can just create a P3 variable, use the find & replace feature to replace all P1 occurrences with P3, delete P1, then rename P3 to P1)

Hope that helped you

Best regards,

Rivka

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...