Jump to content

Interrupt in UniLogic? or Write output immediately


Recommended Posts

Hi!

 

In my current project I need a little help from you guys! In one part of the project I need to control 216 outputs at the same time with a bit high frequency. ( Now, it's a working machine with Mitsubishi PLC, I have to replace it with unistream for other reason. By the way, the mitsubishi PLC has normal (no pwm) transistor outputs and a basic CPU model.)

The requested frequency is 200Hz 20-45% DC. Now, I can reach 70-80Hz besides 5-6ms of PLC cycle time. In VisiLogic there is an opportunity called Write Output Immediately. Is it exists in UniLogic?

Or it would be another option to reach 2ms wide impulses on outputs at lower frequency

It is not acceptable to use UID-0808THS (200 PWM outputs non sense). Any idea?

My PLC-s: 

USP-156-B10

UID-W1616Ts and lots of UID-0016Ts

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...