Jump to content

Recommended Posts

Hello 

I have a problem with my V1210.

we have a energy meter with modebus TCP IP.

The measuring device is connected to the network 192.168.130.250 port 502 but I have problems establishing a connection between the two devices. V1210 ethnet card 192.168.130.180 connected in the network. Perhaps someone can help me to establish the connection and explain how I can get the various data from the measuring device to the V1210. Thanks for your efforts kurt

X96-5.pdf

Link to post
Share on other sites

Let me repeat:

1 hour ago, Flex727 said:

Have you reviewed the example programs that came with your VisiLogic installation?

They can be found at Help / Examples, then drill down to Projects / Communication, then look at the examples for MODBUS. They will be for PLCs other than your V1210, but the ladder logic is identical. You probably want your PLC to be the MODBUS Master, so look at those examples.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...