Jump to content

Unicloud setup: PLC serial invalid


Recommended Posts

I am setting up a new Unistream Pro US5-B10-T24 and I am experimenting with the UniCloud option. After following the tutorial to the point where I need to create the asset from UniApps, the creation fails with this message: "The PLC serial is invalid (response 400, code 1)". 

The PLC is connected to the internet, and manages to log in to a UniCloud account I have set up. It also automatically populates the serial number field in the create asset form.

 Is the specific PLC not supported, or does it perhaps need to somehow be registered from the vendor's end?

We procured it earlier this year and updated the firmware for compatibility with Unilogic  V1.31.116.

Link to post
Share on other sites

Thank you AlexUT.

I have since read that the model we have been using in the past year or so is Unicloud ready but doesn't come with the 5 year subscription. I'll contact our local supplier for the options.

Link to post
Share on other sites

Thank you Joe.

I downloaded 1.31.146 and forced an OS update, but still had the serial number problem.

The Unitronics support team looked into it and as I understand it there was a problem on the UniCloud server with the details of the PLC with that specific serial number. They were able to resolve it from their end after which I could successfully create the asset and start creating dashboards etc on UniCloud.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...