Jump to content

0808THS


Recommended Posts

Hello  everyone,

I have a problem whit pulse train output,

I use PTO to control servo drive .  On this application i have a two segment of one step.  First step have 400 pulses and 1500 velocity. Second segment have 800 pulses and 5000 velocity.

The problem is on delay between first and second segment. This delay is acc 0.75 sec.  I configured two function block whit above note mentioned parameters. 

I detected this problem when connected oscilloscope on high speed output on IO card.

I need to make application to work continuously without delays .

Do you know what is happened ?

Could you please help mi to solve a problem?

Thank you in advance!

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...