Jump to content

example programm for queue managmant in in unistream


didi

Recommended Posts

Hi,

I need help for example  programm queue management. 10 vacuum demands and one vacuum pump.In each demand part must turn on vacuum valve  in queue management.Each once can work one valve.

Thanks!

Link to comment
Share on other sites

Hi didi,

i think that you are talking about a feeding system that has to works in FIFO mode...right?

I suggest to use a DTI where you insert the receivers that need to suction and a counter, that you will increase/decrease, about the DTI position to insert or remove.

then, if necessary, move the receiver of row 0 in the "working flow".

Link to comment
Share on other sites

10 hours ago, didi said:

In each demand part must turn on vacuum valve

I build 8 channel feeder from one vibratory bowl.

Main problem - what system must do if two or more receivers send signal at the same time.

In my case i must build something like that

You can see - system has channel activation priority and must switch off all active switch.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...