Chris2 Posted March 30, 2023 Report Share Posted March 30, 2023 Is there any way to add serial comms settings adjustment (i.e. baud, stop bits, data, parity) within a Unilogic program. Can this only be done in UNIAPPS? Quote Link to comment Share on other sites More sharing options...
Chris2 Posted April 13, 2023 Author Report Share Posted April 13, 2023 Just wondering if anyone has had a chance of looking at my question above (March 30). I just need to know if serial comm settings adjustment can be incorporated within user program or can this only be done in UNIAPPS Quote Link to comment Share on other sites More sharing options...
Gabriel Franco Posted April 13, 2023 Report Share Posted April 13, 2023 All comm parameters can be configured using Unilogic (Project | PLC Communications | Serial COM or from properties window of serial communication module under hardware configuration) within your application and can be modified using UniApps. Quote Link to comment Share on other sites More sharing options...
Chris2 Posted April 15, 2023 Author Report Share Posted April 15, 2023 Hi Gabriel, Thanks for the reply. I know how to adjust the comms settings in Unilogic. I was just wanting to find out if the settings can be made adjustable in the finished program. So the end user can adjust them if need be. If it can only be done in UNIAPPS that's fine. Quote Link to comment Share on other sites More sharing options...
Gabriel Franco Posted April 15, 2023 Report Share Posted April 15, 2023 Only in Uniapps as long as I know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.