Just wondering if anyone out there has been able to esitmate how much data they are using when monitoring a controller over the Remote Operator Software. I was able to use the Wireshark software and monitor the destination IP and Target Port. I came up with a usage of 0.016MB/ Sec which would equate to about 57MB/ Hour.
Just curious to see how my numbers stack up. In my opinion 57MB is pretty high.
Any other ideas or software used would be appreciated
Remote Operator Data Usage
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Just wondering if anyone out there has been able to esitmate how much data they are using when monitoring a controller over the Remote Operator Software. I was able to use the Wireshark software and monitor the destination IP and Target Port. I came up with a usage of 0.016MB/ Sec which would equate to about 57MB/ Hour.
Just curious to see how my numbers stack up. In my opinion 57MB is pretty high.
Any other ideas or software used would be appreciated
-Thanks
Tanner
DRV INC
tcatone@drv-inc.com