[help to display a value on screen with two digits after the decimal point]

is there a way to display a value on screen with precesion two digits after the decimal point, knowing that this value comes from '' MI : memory Integer''

 

thanks.

 PS: I used the block 'store F', to convert the value 'MI' has value 'MF' but it gives a whole number without decimal.

[problem with my new Cinterion TC65 GSM modem]

I wonder if there is a person who uses the Cinterion TC65 modem in Canada, I just want to know the network provider sms to buy SIM card

thanks

[Initialize Modem on PLC using AT command]

Hello, I wonder if there is a person who uses the Cinterion TC65 modem in Canada, I just want to know the network provider sms to buy SIM card

Thank.

[Initialize Modem on PLC using AT command]

Thank you for your answer, I followed the stages to initialize the modem ' Prepare the modem aside PLC ', but I have the same problem, the modem does not communicate.

[problem with my new Cinterion TC65 GSM modem]

Hello, I have a problem with my new  GSM , GPRS Cinterion TC65 modem, I am unable to initialize it with my PC, I use visiologic OPLC IDE 9.4.0 Build Version 0.
it still Gives me the same error code 284 (modem operation failed modem not connected).

lines of command that gives me error code is:

 

AT&F
AT+CPIN=^XXXX^   ------------------------------------------- Error
WAIT 3
AT^SCFG="GPRS/ATS0/withAttach","off"
ATE0&C1&D0&S0X4Q0S0=0V1-------------------------------------------  Error
AT+CPMS=SM,SM,SM---------------------------------------------------------Modem Input Error
AT^SGCONF=540,540,8
AT^SCFG="Radio/Band",1,1
AT&W0
ATI

 

I need your help, thank you.

Best Regards,

ADIL

[V130 - Communicating with Land Line Modem]

Hello, I have a problem with my new Cinterion TC65 GSM modem-14D, I am unable to initialize it with my PC, I use visiologic OPLC IDE 9.4.0 Build Version 0.
it still Gives me the same error code 284 (modem operation failed modem not connected).
I need your help, thank you.

Best Regards,

ADIL

[Initialize Modem on PLC using AT command]

Hello, I have the same problem I am unable to reset my modem Cinterion TC65 GSM-14J with my pc I use visiologic OPLC IDE Version 9.4.0 Build 0.
is that you can help me please. it still gives me the same error code 284 (modem operation failed modem not connected).
thank you.

Best Regards,

ADIL