capitan_cook
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by capitan_cook
-
-
I am to connect a Samba SM43, which is equipped with Ethernet module V100-17-ET2, a barcode scanner and process the scanned data.
Does anyone have a tip for me as I can realize this?
Ich soll an einer Samba SM43, die mit Ethernet Modul V100-17-ET2 ausgestattet ist, einen Barcodescanner anschließen und die eingescannten Daten verarbeiten.
Hat da jemand einen Tipp für mich wie ich das realisieren kann?
-
Hello,
Thank you for your quick response.
I have found my mistake. Modbus I have set correctly.
I am trying to control with the Mobus an inverter. This accepts the command only when a number of bytes currently being used as bytes consist of a MSB and LSB.So I SI143 set to 10.Now the inverter is running.
Greeting Cook -
Hello,
I want to write two coils with the coils Force Command 603
Unfortunately, I can not.
I'm probably not the right structure.
I would like to describe ID 2, coil number 0001h and 0002h with MB1 and MB2.
I have selected the following structure can you tell me what is wrong?Greeting Cook
Please forgive my poor English.
Samba with Barcode scanner
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Many thanks for your response.
As the existing Samba SM43 is already equipped with an Ethernet card to control the existing external I / O's, the Samba can not be equipped with an RS-232 card.
This means that the barcodescanner should also run on Ethernet TCP / IP based to be able to be integrated. Since the scanners are very expensive are about 5,200 € (Sick CLV690-000), I wanted to know once if someone has experience with it before I buy such a scanner.
Now I think that I will tread the more inexpensive way. I will replace the SPS with a VISION 570 and then use a barcode scanner with RS 232. However, I have to convert the entire existing program of the SM43.