0x00
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by 0x00
-
-
I have a subroutine with 7 valid nets.
nets 8 through 16 are blank, no op.
net 17 is the return.
I would like to delete the white space and have the return be on net 8. but I cannot cut nor delete...nothing happens. Return remains way down at the bottom of a bunch of white space.
a bug? or am I missing something?
V9.4.0, build zero. 570 vision plc app.
thanks
Intermittent start-up problems
in UniStream: Hardware
Posted
was there any news here? we stopped using the URB-TCP I/O and just installed a PLC with IO and connected with ModbusTCP. The urbtcp was amazingly difficult to utilize and a whole productivity 2000, base, cpu and modules cost a bit less than all the same IO with the urbtcp......and you get processing ability to boot. Also, the PLC lets you assign modbus addresses any way you like for the tags so you put all the ones you need in order and it's then easy to map to the HMI; no need to look up registers since you get to assign them all in a block if you want.
Was it really the panel? I have struggled with the ethernet connections on these and also the 'adapter settings' in the windoze box but never been sure why the connections are so unreliable.
Our URB TCP never had comm issues, and I can connect 'through' the panel to other things downstream, but the programming connection always fails repeatedly.