[IO Mapping]

Thank you for all the answers.

I got very usefull tips.

I hope, someday, I can help you too.

[IO Mapping]

Hello,

yhank you for your answears.

I'm doing like this: I have MB for every Input (18 ) after than I have a screen were I write in for every MB (18) a value from 0to 17 to know wich MB will be the respective Input.

So I have a value wich has to be converted in an INPUT number.

I take tjat value and if it is 0 than I put in MB0 the value of I0, if 1 I'm putting the value of I1 in MB0 and so on.

Do you have any other suggestion?

It will be september when I will finish this project

[IO Mapping]

Hello,

thank you for your respond.This will help me a lot.

My other thing is, that my client wants from me to have the possibility to change offline, without connecting to PLC, the MB pointer to I/Os.

So basicaly, if he is changing the wiring, he enters in one of the HMI screen and puts the new input/output to the MB.

I dont know if you understand?

Thank you,

Boros Csaba

[IO Mapping]

Hello everyone,

I'm new on this forum. Yes I made many searches and found nothing.

I have a project with V350-35-TA24 and I have to remove all the direct references to I/Os and replace them with MBs, so that I can do the I/O mapping.

 

Do you have any suggestions?

Thank you.