Jump to content

gvlasso

Members
 View Profile  See their activity

  • Posts

    2

  • Joined

  • Last visited

 Content Type 

Posts posted by gvlasso

  1. V570 PID

    in Vision & Samba PLC + HMI Controllers & VisiLogic Software

    Posted

    The truth is that the program was at its very best beggining ( - |SB2| - PID Config ). So there wasn't much to send. Fortunately I already got a reply from Unitronics support and the problem is already solved.

     

    The solution is that I had to use the functions blocks (for run PID, configuration, etc) from PID Autotune menu rather than the PID menu.

     

    Anyway the project is proceeding and I am sure that I will come up with other questions for help and advice. So, stay tuned :) .

     

    Thanks a lot for the interest Joe.  

  2. V570 PID

    in Vision & Samba PLC + HMI Controllers & VisiLogic Software

    Posted

    This is my first post so I didn't have the time to introduce myself. Anyway I am starting my first project with a V570 and an snap in IO card in order to monitor and control the process of a drying oven. I viewed the corresponding webinars and I think I got the main idea about Visilogic (My previous knowledge about ladder and PLC programming is minimum).

     

    Anyway when I insert a configuration PID FB in my project and trying to compile the code, I get the error mesagge that PID Config is not supported by Color PLC or/and V130-33. Am I missing something too obvious ? 

     

    Any help is welcome,

     

    Thanks in advance,

×
×
  • Create New...