[Jazz 20 Communication Problem]

Thanks everybody for help. I checked this issue on other notebooks: Toshiba Satellite C55A an Lenovo IdeaPad S210 Touch. Both with Windows 8.1 64bit. This problem is concerned on every Windows 8.1 64bit. This method helped:

 

Please disconnect PLC from USB cable.

Disable UAC at your computer.

Go to directory C:\Program Files (x86)\Common Files\Unitronics\USB Driver

Run VCP_V1.3.1_Setup_x64.exe file.

 

When installation finished – connect PLC to PC and leave it until it install and then update driver. Sometime it will take tens of minutes.

 

Check in Device Manager if installed driver is OK – appears under Ports. Then you can use corresponding COM port. Port number should be between 1 and 16.

 

If it does not works – tray other resources (from web):

http://www.navmantech.com/aumarketing/EDM/Support/Magellan/VCP_V1.3.1_Setup.exe

http://www.navmantech.com/aumarketing/EDM/Support/Magellan/VCP_V1.3.1_Setup_x64.exe 

[Jazz 20 Communication Problem]

Hello

Still doesn't working. Maybe any others idea. Is any option to install drivers in other way? 

[Jazz 20 Communication Problem]

Hello

 

I have a problem with Unitronics Jazz20 R31. I'm using Windows 8.1 64-bit and u90 ladder 6.6.6. In Device Manager there is "STM32 Virtual COM Port". I am using the USB cable. This issue does not appear on my other computers with windows 7 64bit or Win 8 32-bit. Please help me

 

Greetings

Krzysiek