[Hidden main (Project/Edit/View) toolbar.]

Indeed that workaround  worked great.
 You just saved me great deal of IT paperwork

[Hidden main (Project/Edit/View) toolbar.]

Hi,
Just before shutdown of Visilogic (9.8.31)  i managed to unpin main top toolbar - one containing Project/Edit/View etc.
After relaunching program whole bar is hidden. I'm seeking way to restore it without reinstalling environment... 

I also noticed that when working on 3 screens quite often combo boxes fails to show up when window is not located on primary display.
 

[Unable to connect with Samba Win7 32]

Hi,
Problem was solved when i was posting this reply...
I didn't checked most obvious thing - drivers version, when i asked IT for update, everything started to work just fine.
​

For future seekers here is reply to upper questions:
1 - On windows XP there were no problem at all.
2 - I have only one Visilogic PLC for my disposal (SM35 mentioned earlier).
3 - Dell PR12s docking station equiped with LadderComOp2 (Drivers 2.0.0.0)
     No-Name,as well as Automation Direct GoldX, Profilic USB-to-Serial Comm Port (Drivers 3.3.2.102)

Working setup: GoldX converter and 3.4.67.325 drivers.

Thank You for reply!

[Unable to connect with Samba Win7 32]

Whenever I try to connect with Samba (SM35-J-R20) via VisiLogic (9.7.9 Build2 OS Windows7 32 bit) i receive error 206 (Communication driver error), I/m unable even to  get com parameters by connection->Communication &OS-->PLC Status

I have tried Build in port as well as USB-rs232 converter, checked port nr, baud, fifo etc...
Cable is fine - works perfectly on laptop with win XP.

Following instructions concerning UAC did nothing, as well as running as administrator.
Downloading new install file also didn't helped...
Once in a while whole application crashes (Some infinite comm loop?).
Is there any other options i could try?