I have a problem with the canbus comunication. I need to connect a PLCV130 with a OPLC1210 and 2 EX-RC1.
I started with the communitacion between a OPLC 1210 (ID#1) and one EX-RC1 (ID#2), I am using the help´s program (V570_CAN Master for EX-RC1 for PLC, and the other for the EX-RC1). With the EX-RC1 I have an IO-DI16. But it has been impossible to me to make this connection.
The PLC and one EX-RC1 dont see each other in the canbus network
canbus issue
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Dear all;
I have a problem with the canbus comunication. I need to connect a PLCV130 with a OPLC1210 and 2 EX-RC1.
I started with the communitacion between a OPLC 1210 (ID#1) and one EX-RC1 (ID#2), I am using the help´s program (V570_CAN Master for EX-RC1 for PLC, and the other for the EX-RC1). With the EX-RC1 I have an IO-DI16. But it has been impossible to me to make this connection.
The PLC and one EX-RC1 dont see each other in the canbus network
Any advice for me thanks.
I appreciate your help