Jump to content

mimiyum

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Posts posted by mimiyum

  1. Runtime Error 9 Subscript out of Range

    in Vision & Samba PLC + HMI Controllers & VisiLogic Software

    Posted

    I am using Visilogic 8.6.3 on a V130. This has been well.

    I started a new project which is very similar to the previous project. But when I compile or download this to the V130, I get

    RUNTIME ERROR '9'

    Subscript out of Range

    Why is this?

    If I go back to the previous project and try to download it into the new V130, I don't get this error. In other words, the problem is not in my Visilogic software.

    Where do I find the problem causing this?

    Thanks

  4. Can we have 2 versions in one PC?

    in Vision & Samba PLC + HMI Controllers & VisiLogic Software

    Posted

    I'm using windows 7 and got the UAC disabled. That's working fine.

    I am able to get it going ONLY if I register the version swapper each time I want to use either version. Is this correct?

    First, I register the version, then run one version first using the shortcut. Then if I run the other version, I will get an error so I need to register it again and create a shortcut. It doesn't create a new shortcut coz the previous shortcut is still there. But this time the shortcut will work. But the other version can't be used unless it is registered again

    Is it supposed to be this tedious?

  5. Can we have 2 versions in one PC?

    in Vision & Samba PLC + HMI Controllers & VisiLogic Software

    Posted

    Thanks for the advise. Unfortunately, it's not too clear whether we are supposed to select modify, repair or uninstall.

    I first tried Modify but it didn't change the version 8.01.

    Then I tried repair and at the first try I was able to open the newly installed version 8.6.03 and closed it. When I tried to open the shortcut of 8.01 created by version swapper I get "application error". When I run the new version, I getg "runtime error bad collection index"

    I will try to uninstall and reinstall the new version and try all over again. Wish me luck

  8. Can we have 2 versions in one PC?

    in Vision & Samba PLC + HMI Controllers & VisiLogic Software

    Posted

    The version swapper does work, but it's a little confusing to set up. You have to override the default settings and install different versions of Visilogic in different directories. Carefully read the Help on how to do it.

    Joe T.

    So, this means I can install different versions in different directories. If I do this, I guess I can just use the old version on my older PLCs and the new version with my new project, right?

  9. Can we have 2 versions in one PC?

    in Vision & Samba PLC + HMI Controllers & VisiLogic Software

    Posted

    I have been using Visilogic 8.01 on several PLCs which I need to work on every once in a while. Is it alright to install two versions of Visilogic in my laptop? I can't afford shutting down my other PLCs on site caused by error problems due to differences in versions or OS.

    I had a problem like this one time and the version swapper didn't help or maybe I just didn't do it right. The solution was:

    1. uninstall the newer version

    2. install the old version used by the PLC

    3. reprogram the PLC using the old version

    4. uninstall the old version

    5. reinstall the new version

    This was only acceptable under the circumstances at the time. Now, I cannot go through that same process each time.

    I'm asking this because I'm about to start on a new project and it might be good to use the latest Visilogic Version at this point.

    Thanks

×
×
  • Create New...