PLCHobbyist
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by PLCHobbyist
-
-
Thank You mr Tauser!
I will try it tomorrow!
-
Hello,
I'm using a M90-R1 PLC.
A section of my application is used to convert degrees Celciust o Fareheit. The formula is Tf = (9/5)*Tc+32.
Is the M90 can handle numbers with decimals? For the 9/5, since the result is 1,8 i used an integer number 2 for the calculation... It give a approximate conversion...
How can i improve it?
Thank you for your help!
Communication with a V120-R1
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Hello,
I want to use my V120-R1 to read and display the serial data sent from my Qkits VK011 thermometer.
I know that i have to use the "Protocol scan" FB but i don't understand how to configure it.
There is 2 COM ports on the PLC; does these ports correspond with COM 1 and COM 2 or they are assignable? If yet, how can i do that?
Here is the data that came out from the VK011, as it appears on a sniffer program:
0A0D
QKits.com0A0D
0A0D
0A0D
Sensor 1,+22.50 , DegC, 0A0D
Sensor 4,-02.13 , DegC, 0A0D
Sensor 1,+22.50 , DegC, 0A0D
Sensor 4,-02.13 , DegC, 0A0D
Does somebody can help me?
Thank you!