Perry Wayne
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Perry Wayne
-
-
It was asked of me to reconfirm, because we had purchased a automation direct 15" display
at one time and the face had puched out until it popped. If we pressurise the cabinet to 5psi,
I will not have this problem on the unitronics 1210 and 1040 with the face pushing out?
We are excited but nervous.
This will be great if the unitronics
can do this for us. We know that the
allen bradly HMI's can do this but we
want Unitronics.
We just want to make sure that we understand correctly.
Thanks again.
Perry
-
That is great news. We were concerned about the touch membrain trying to push out.
I think the Unitronics will be a welcome addition to our chemical batching business.
Thanks again
-
That would be great. We do a lot in the chemical field and we would love to use Unitronics in
our Class 1 Division 1 and 2 rooms. We don't go over 5psi.
Thanks and I'll keep my fingers crossed.
Perry
-
Hello,
I would like to know if the vision 1210 or the 1040 can handle being installed in a cabinet that is
pressurised to around 5 psi. This is for a class 1 Div 1 room. It would be great if it could.
Thanks
Perry
vision 1210
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Technical Support Manager,
Thank you.
That is the information I was looking for from unitronics. I feel that we have the what we need to move
forward.
Thanks again and I will let you know how our project turns out.
Perry Perisho