AZ1975
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by AZ1975
-
-
As I promised I attached two examples and some explanations. Enjoy it
AZ1975
-
Hi to all, i was a few days off the office, i'll send you a pdf printing of the program
-
Check port 25 open
Tomorrow i can send you my prog with email working
-
Hi,
I was trying to SMS over Ethernet,
the question is how the PLC browse to a dedicated http web server.
I have a V570 with Eth card communicating with HMI, and PC.
Thanks,
AZ
-
Muy bueno el proyecto, excelente grafica. Felicitaciones.
Podrias ayudarme o enseniarme como mandas mensajes SMS que modem utilizas y algun ejemplo?
Muchas gracias.
AZ
-
HOW DO I IMPORT HMI DISPLAY FROM V1210 TO V570 WITHOUT GETTING THE RUNTIME ERROR AND CRASHING? (VISILOGIC 9.3.1)
THANKS
-
MyProj.pdfJust returned from South America, where the project take place, about the process:
After the extracting the juice from the citrus they take the peels, chop them, make a mash, filter, and concentrate the liquids.(of course is more complicate than that...)
The PLC: V1210 with Ethernet Card to control the process and programming remotly. About 150 I/O's, analog inputs to control temps, levels, VSD's. analog outputs for VSD's too.
All objects in the process are programmed logicaly as FunctionBolcks, practically each object is a soubroutine.(objects are: motors,valves,analog signal,level switch,etc).
Enjoy it.
AZ1975
-
I would like to be able to write code and wrap it as a FUNCTION BLOCK or CONTROL MODULE and call it severall times with different names just like other PLC's do, to that FB connect a FACEPLATE at the panel and so. I wish...
-
Thank you all for your tips.
For sure the I/O will be placed inside an existing board. What about the PLC/PANEL ? I would like to place it "cut-out" at the same board as I/O.
What do you think?
thanks
-
Hello,
What PLC do you recommend for a Dairy Farm, about 200 I/O, few analogs, and maybe external HMI .
Thanks,
AZ1975
PLC sends E-mails using Ethernet
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
It means that you don't have an active mail acount, try anyname@domain.com