aqueousdan
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by aqueousdan
-
-
Thankyou so much for your help guys.
I have run the program as administrator and it still doesnt work with my cable.
I downloaded the new drivers and used the chip checking tool and it turns out I dont have the 2303 chip in this cable. I have ordered the correct cable so I shall wait for that to arrive before investigating further.
One more question before I go, are the COM settings I posted before OK? Will they match up?
Bits Per Second: 38400
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Connection Type: Serial
PC Port: COM 6
Baud Rate: 38400
Time Out: 4 Seconds
Retries: 12
Thankyou once again guys
Dan
-
Thankyou so much guys. I have both of the cables on order now!
-
I apologise for the posting here for the second time in less than 24 hours.
My problems have arisen because I have inherited a V350 at work with no user manual or cables. I have managed to get my hands on a USB to Serial converter and a serial to RJ11 cable which I have been using to connect another PLC to my computer. I have it connected to Port 1 on the V350.
My current driver is USB Serial CH340 connected to COM 6. Does anyone know if this is ok? My port settings in windows device manager are:
Bits Per Second: 38400
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
When I try and connect in the Visilogic software I put in the settings as:
Connection Type: Serial
PC Port: COM 6
Baud Rate: 38400
Time Out: 4 Seconds
Retries: 12
When I try and connect I get an Communication Driver Error (206)
Does anyone have any ideas?
There is already a program running on the V350 that I want to erase and start afresh. Could that be causing a problem?
Thankyou for your help once again.
Dan
-
Sorry if this is a dumb question but we have misplaced the cable for our V350-J-TR6-N
Which code do I need to order for connecting from USB to what looks like RJ11 please?
Thankyou very much for your help
Dan Bowles
Is there a guide to connecting to the V350? I cant seem to.
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
My honest answer is that I dont understand this part of things. I didnt realise that that baud rate was low.
What would raising the baud rate gain me and what settings would you recommend over that?