I have configured a high speed counter on a IO-DI8-RO8 connected to an EX-RC1.
The counter is incrementing as the flow meter pulses (which is very slow) If I try to store a zero value to the MI assigned to the flow meter, it holds the zero whilst the condition is forced, but then reverts back to the previous value as soon as it is released.
--[MB0]------STORE
0 to MI50
If I use a positive transition on MB0 I dont even see the zero.
I use a HSC on a different V350 and it works great in this way as a crude shaft encoder using a proxy sensor on a toothed pulley.
Thanks
Having exactly the same problem with a IO-DI8-TO8. expansion module. This is connected to a V130-33-RA22.
Have a second flow meter connected to the V130 and I can store a zero value to the MI used with this HSC. However when I try and store a zero to the MI assigned to the expansion module HSC it reverts back to the previous value as discribed by Ziwi.
HSC wont accept store.
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Having exactly the same problem with a IO-DI8-TO8. expansion module. This is connected to a V130-33-RA22.
Have a second flow meter connected to the V130 and I can store a zero value to the MI used with this HSC. However when I try and store a zero to the MI assigned to the expansion module HSC it reverts back to the previous value as discribed by Ziwi.
Can anyone please help.