Hilton Jr.
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Hilton Jr.
-
-
-
Dears:
I´m using the V350 in a new project, for measures in 3 coordinates (in milimeters), using encoders, and after finish one measure, the display must be reset, and the results send to one PC. Explaning better, one block will move in one table and 3 arm with encoders will check the 3 dimensions of this block. 2 sensors will check when material is present (start count), and when the material finish the way (send the measure to PC, and reset the coordinates).
Like I don´t have or find a good manual to explain how to do the plc/ihm program, please, I´m needing one step by step to do this program.
Thank you!!!!
Problems Visilogic and Windows 7
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
hi Ausman. I already try many times the re-install, including with others 3 old versions and the newest of Visilogic, administrator and not, but the problem is the same. I don´t know how and why this problem happens, because the Visilogic was running normally, and after some atualization of Windows7 starts the problem.
thanks