Capa_Anthony
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Capa_Anthony
-
-
Hi Ofir,
Thanks for the answer, you understand my project and my question is perhaps a bit stupid but I do not know how to link the tag to inputs and outputs, we have to configure it in a menu or with a ladder program. Thank you for your help.
-
Dear All,
I'm looking for program example to try to use Ethernet/IP and specialy with implicit message.
I need to communicate in Ethernet/IP with another PLC (Siemens, Omron..) with my Unilogic PLC.
My PLC will be the slave and another PLC the master. The master will send trame that only must change the I/O, there is no another data.
I have configure it to adapter but after that I don't know how I can lies trame to Input/Ouput of my PLC . It's the first time I use Ethernet/IP so I need some documentation or example.
I use EtherNet/IP Tools from Molex to simulate the master.
Thank for your help.
Anthony
EtherNet/IP I/O Adapter
in UniLogic Software
Posted
Hi,
I configured the PLC as an Ethernet/IP adapter but I don't understand how to link tag to input/output when I configure the PLC as an adapter for Ethernet/IP.
for exemple, my input_0 on the UID-W1616T (alis: Start_Process), how can I link it to the input tag created in adaptater node.
If someone have a program explemple, it's can help me
I have watch the tuto on Youtube but this parts is not explain.
PS: It's the first time I use Ethernet/IP on a PLC.
Thank.