[EtherNet/IP I/O Adapter]

Hi,

I configured the PLC as an Ethernet/IP adapter but I don't understand how to link tag to input/output when I configure the PLC as an adapter for Ethernet/IP.

for exemple, my input_0 on the UID-W1616T (alis: Start_Process), how can I link it to the input tag created in adaptater node.

If someone have a program explemple, it's can help me 

I have watch the tuto on Youtube but this parts is not explain.

PS: It's the first time I use Ethernet/IP on a PLC.

Thank.

[Implicit Messaging EtherNet/IP]

Hi Ofir,

 

Thanks for the answer, you understand my project and my question is perhaps a bit stupid but I do not know how to link the tag to inputs and outputs, we have to configure it in a menu or with a ladder program.

Thank you for your help.

[Implicit Messaging EtherNet/IP]

Dear All,

I'm looking for program example to try to use Ethernet/IP and specialy with implicit message.

I need to communicate in Ethernet/IP with another PLC (Siemens, Omron..) with my Unilogic PLC.

My PLC will be the slave and another PLC the master. The master will send trame that only must change the I/O, there is no another data.

I have configure it to adapter but after that I don't know how I can lies trame to Input/Ouput of my PLC . It's the first time I use Ethernet/IP so I need some documentation or example.

I use EtherNet/IP Tools from Molex to simulate the master.

Thank for your help.

Anthony