[Communication between the V700 and the inverter]

Hi Dan, 

 

I've  already looked at the example and adapted the example to my case with a V700. I've downloaded them in the V700 but the motor don't run so i think it's the communication which have a problem ? 

 

Paul

[Communication between the V700 and the inverter]

Hello, 

I have the V700 with a Snap-In  V200-18-E2B and a Inverter. I want to run a motor with a simple programs. I want the V700  communicate in RS485 with the inverter. I  use a USB cable to send the program to the V700.  I know i have to plug my RJ11 cables in the port of the V700 and set the communication  on RS485 on the bottom of the V700. For the other part of the cable i have to take 2 of 4 wire and connect them on the Inverter. What i have to do after ? How i set the communication ? Will i have to  create programs with contacts and coils to run the motor forward, or it have a compiled programs which contains some of these command ? 

Thanks,