pat_newbie
-
Posts
7 -
Joined
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by pat_newbie
-
-
Current program i'm adding the MB1149 to switch over to manual triggering. it was suppose to clear buffer once mb2403 turn on for the original program however joe mentioned that i might be clearing the buffer too fast upon receiving the text so i add this for the testing. So anyone can resolve my issue on the last text? ☹️
-
The above program is done for step by step sending command to retrieve the text. i'm blocking it temporary so as to try the effect of clearing the buffer manually upon receiving the text so that i won't miss any of the text before clearing. mb347 is to perform manual reset.
-
Hi again,
So what should be the correct ETX for my case as this cannot be left blank. For my trying i have removed the OD from the ETX and change the receive command and reset buffer to be in manual trigger mode but i'm still not able to capture the last text. Appreciate if you can resolve my problem.
-
-
-
visilogic proscan read out for last line
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Hi all,
I have resolved the issue and confirm there is nothing wrong with 0D+0A for ETX or clear buffer issue. Testing the read back using hyper terminal have no issue capturing the full text from the modem however with the controller some text was missing. I guess is an bug issue from the controller. Please see screen shot an "ackkk" i send back to the modem using my mobile and in return the controller reply back with text that come with my mobile number. Case resolved.