jeepers52002
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by jeepers52002
-
-
19 minutes ago, Joe Tauser said:
I have one of those demo cases.
This is the RFID reader it uses-
https://www.promageurope.com/products/rfid-readers-and-writers/rfid-readers-20cm-gp20-30cm-gp30.htm
It sends the data to a V700 via ethernet. I'd ask Unitronics at support@unitronics.com for the UniStream Demo Case V700 program to get sample code.
Joe T.
Awesome! Thanks Joe!
-
I stumbled across a PDF document for use with some type of Demo setup that Unitronics has that included mention of an RFID reader.
Has anyone used an RFID tag reader with the UniLogic PLC? If so, can you share which reader you used and any road blocks you might have encountered along the way?
I'd like to implement one for door access on a smart home project.
Thanks!
UniLogic fails to connect USP-104-B10
in UniLogic Software
Posted
I realize this is somewhat of an old topic but I'm just pulling one of our UniStream PLCs off the shelf for the first use in a long time. I tried updating the firmware in two steps, from 1.28.39 to 1.31.122 and then to 1.36.44. At no time have I been able to connect to the PLC from ethernet, directly connected to my PC. If I monitor the traffic through the windows connection properties, data is being sent/received constantly but UniLogic will not find the PLC.
My UniLogic version is 1.36.63, downloaded and installed today.
Any assistance would be greatly appreciated.
Thanks!