[RS232 receiving data probem]

2 hours ago, kratmel said:

This is my simple protocol configuration for zebra motorola  LS2208 barcode scanner.

You can use numbers placed in vector copy MI150 (in my sample),  if you scan another barcode it will be replaced (MI50 to MI150 copy vector)   

 

P.S. But maybe moderator can place this part of topic separately.

 

thank you, i will move it to another topic

[RS232 receiving data probem]

On 3/25/2020 at 1:53 PM, kratmel said:

I used this little samle for read non standard protocol from power supply.

Message with different length easly read in to MI vector.

PROT_FB.vlp 255.9 kB · 5 downloads

Hi, i´m having issues reading from a barcode reader Honeywell MS5145 on RS232.

First i modified the visilogic example for communicating with hyperterminal but without any success.

Than i made  some mods on  your sample and i could receive messages from Docklight V2.3 (that is free insteed of hyperterminal), configured to be the same message size and config as from the barcode reader.

Atached is the modified sample code and the docklight screenshot

The text on blue is what i sent to the Samba SM35, the text on red is what barcode reader sends to the SM35 but without success. Same 7 char message with <CR><LF> as ETX. But the Protocol scan FB just completes sessions from docklight, nothing from the barcode reader.

 

 

PROT_FB_test.vlp