Report problems connecting to the PLC (JZ20) using the USB in Jazz, M91 PLCs and U90Ladder Posted September 3, 2020 On 11/1/2019 at 11:31 PM, Joe Tauser said: Puertos hey i recognized STMicroelectronics Virtual COM Port (COMx) in the ports checked every baud rate/parity and all these specs.. i understand you need aspecial cable to program the controller.. you can not do it eith the USB
problems connecting to the PLC (JZ20) using the USB
in Jazz, M91 PLCs and U90Ladder
Posted
hey
i recognized STMicroelectronics Virtual COM Port (COMx) in the ports checked every baud rate/parity and all these specs.. i understand you need aspecial cable to program the controller.. you can not do it eith the USB