[Problems with RTC and password.]

Both problems are now solved=)

I removed the cpu and connected it again, then RTC worked.

When i added a "!" in the password i got that to work also:)

[Problems with RTC and password.]

CPU is also connected and a UID-W1616T via UAG-XI. If there is problem with that connection, would it cause these problems? The clock is running but very off:)

[Problems with RTC and password.]

I have a USP-070-B10 with sv 1.32.* on the plc and same in Unilogic.

When i try to set PLC password from Unilogic i can fill in a new password but i cant mowe the cursor to the box confirm password and therefore not continue changing password.

My next problem is setting the RTC. If i try from unilogic i connect to the PLC but then geting an  error message saying "Could not apply command". If i try in Uniapps i can choose a new date or time and press OK, the green dots spins for about 30 sec and then nothing has changed.

I have tried to upload an empty project with no more success.