[How to change crc bits in unilogic ?]

Hello i have a problem my plc sends a command (pic1) on modbus but the sensor that is on the other end wants other crc (pic2) how to change crc bits ?

[USC B10 TR22 // UAC CB 01RS4_0 // MODBUS STATUS 3 // HAMILTON VisiFerm DO Arc 120]

I send this

and dont get any response,

[USC B10 TR22 // UAC CB 01RS4_0 // MODBUS STATUS 3 // HAMILTON VisiFerm DO Arc 120]

I found the problem but i still dont know how to implement it in Unilogic.

basically i connected the modbus sensor to usb  and i found out that it is very presize in terms of data. 

I need to send something like this 

 

 

Is it possible to achive in unilogic ?

[USC B10 TR22 // UAC CB 01RS4_0 // MODBUS STATUS 3 // HAMILTON VisiFerm DO Arc 120]

Hello I'm using  USC B10 TR22 with  UAC CB 01RS4_0  as modbus communication dev. I am communicating with HAMILTON VisiFerm DO Arc 120 but the Modbus status is 3 and thus there is no connection. I checked with HAMILTON programmer and the modbus in sensor is working correctly (image 1).

 

I checked with the Logic Analyzers from Saleae and the commands from PLC are "going" but there is no reply from sensor. Is there anything wrong with my program ? (imige 2,3,4,5);

 

 

 

[USC B10 TR22 // No Output Voltage]

Hello,

I connected the plc and outputs as in attached file. But there is no voltage on any outputs any help ?
The PLC outside the outputs works correctly (the LED on outputs are lid when they should bo no V ).

Thx for any hint or help.