ivica
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by ivica
-
-
I thought the same thing about ID collision. Is there any possibility of solving the problem.
-
I used 250kb baudrate in unicom and 5760 in RS485. It may be too quickly but in direction EXF to V350 it works fine. I will try to slow baudrate.
The termination resistors are placed as in photo.
I have tried with same and separate power supply but the result are the same.
Earts are done corretly.
In project I need 4 schaft encoders so I have to add EXF-RC15 for the 4th encoder. The two PLC are placed on the same rail.
Everything works fine until I added RS485 to V350.
-
I was wrong, I steel have the same problem. When I initialize 485 I cant send data from V350 to EXFRC15 via CAN, I can only receive it in V350. Can you please help me with any suggestion.
-
In the meantime, I achieved communication in both directions V3350-EXFRC15, but I don't understand why the "check alive" routine on EXFRC15 shows me that the CAN connection is not established and only if I initiate RS485 in V350. I am sending the EXF program with the CAN com check routine.
-
I have connected V-350 with EXF-RC15 wia CAN com and that works perfectly. But I need also RS485 between V-350 and remote display and then my CAN crashes but only in direction V350 to EXF. In direction EXF to V350 works fine. Can somebody help me.
-
Hi
thanks for answer and program example.
-
Why I have not accelerate FB on Fb`s menu with Version 9.8.91 and OS 4.10 on V350 35 R34.
-
-
I am a beginner with Unitronics, so you said that there is no IO expansion module on V350 that can read shaft encoder.
-
Hi,
I need to read 4 shaft encoder in my project. I am using V350-J-R34 and IO-D16A3_TO16 but after I got it I become aware that IO-D16A3_TO16 can not read shaft encoder with HSC inputs. Is there any IO epansion module besides EXF-RC15 which can read one aditional shaft encoder in connection with V350-J-R34.
display replacement V120
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
I need a new display for V-120, part name lmc75s141c3l . Can you help me.