JDGleason
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by JDGleason
-
-
-
I am working on a Unitronics HMI/PLC that has not been fully programmed since new in 2014. Someone has touched it before me.
I cannot establish comms with UniLogic via USB or Enet. I have tried to do my homework.
Here are the facts:
- I can boot to UniApps – after initialization and white screen I press top right touch screen
- Trying to connect from Unilogic to PLC - USB and Ethernet fail to find any PLC
- Panel IP is 192.168.1.5 in UniApps -> network
- CPU is configured for 192.168.1.3
- I can connect just fine with VNC client to 192.168.1.5 in UniApps -> network
- 192.168.1.3 CPU does not ping
- Installed Unilogic as administrator
- Device Mgr shows a com port number 6.
- PLC force upgrade with DOK fails – The PLC upgrade files do not match or could not be found message….
- Looking at the USB with UniApps -> memory ->SD browser shows all the files in a Unistream_Files folder.
I have a case into support but very unresponsive.
Thank you for any insight.
UniLogic fails to connect USP-104-B10
in UniLogic Software
Posted
I was to resolve this by going back to the oldest available version 1.21.51. Thanks for the help.