[Data Table Date Wrong When Xfer'd To Excel]

Ok well i re-wrote some things, changed around some MI's on my delimited line and delimited write functions, hope this will clear up the issues. Did find some inconsistencies in the logic. Going to load and test in the morning so hope all goes well. Thanks for the info on pointing me in the right direction. Starting to see bits in my sleep, is this normal? lol

Thanks For The Help,

Bill

[Data Table Displayed On HMI]

Got it guys thanks for the help, and feedback. Becoming more proficient at this stuff one Net at a time.

Thanks,

Bill

[Data Table Date Wrong When Xfer'd To Excel]

Ok well here is my current issue. I have set up a data table to be logged to SD card in Excel format. What is happening is all data is transferred properly except the date, examp: date is 01/12/12 it logs as 11/12/12. Checked my RTC to ASCII all set right. Just not sure why the month gets logged wrong. Also by the way, the way my data table writes in the PLC is correct. Do I need to make a separate RTC to ASCII string for the excel DT or can i use the one my PLC DT reads from. If anyone has run into to this any help would be appreciated.

Thanks,

Bill

[Data Table Displayed On HMI]

Hi,

Probably a simple answer to my question. I am using a v130 and i and trying to link a data table to be displayed on my HMI. watched webinars, read all HMI help manuals, and found nothing to help me with this. I have all displays set up but not sure how to pull from the DT. Any help or suggestions on where to find this info would be much appreciated.