[WebServer need help.]

Hello,

I have managed to do it BUT only once! I explain myself:

I download the application the PLC, do to him ping his IP and he answers me, I enter the explorer introduce this IP and the page ' Start.htm ' appears, (so far well) but of to load and he does not answer already again ever.

I do him again ping and he does not answer, and the page does not load any more and expires.

Likewise I lose the communication with Visiologic.

I have read in the help, which the Socket 2 uses for SCADA systems which use MODBUS TCP over IP.

I wonder: would it be possible to use the Socket 2 for the Web Server in Modbus Tcp and to leave the Socket 1 for communication with Visiologic?

Thank you

[WebServer need help.]

Hi,

Thanks for the response.

I do not understand:

In order to eliminate the router settings, try to connect your PC directly to the PLC.

By means of connection series? Crossed Ethernet?

Is it normal that with TCP_RAW loses the connection in the Visiologic?

Do I suppose that it will be ethernet crossed, if it is like that, where I can find the scheme of the cable that I need to mount it?

Thank you again and excuse my ignorance.

[WebServer need help.]

Hello again,

I have kept on doing tests:

- I have updated the O/S of the V130 up to 3.6 (14).

- I have changed of router.

- I have changed the IP, so much that of the PLC, as that of my PC.

- I have tried with all the protocols.

And it continues without working: (

To help me please

[WebServer need help.]

Hello all,

I am having serious problems with the configuration of the advanced webserver.

I have continued the manual correctly (or I believe that)

http://www.unitronics.com/data/uploads/software%20utilities/WebServer.zip

and I do not manage to make it work. I thought that it might be a problem of ports in the router, but I it opened all; The bits SB217 and SB218 (SD Card Present and SD Card is write-Enable) is to "1".

I kept on doing tests and change ' Sock INIT ' to the protocol HTTP, TCP and UDP but with none it worked.

The strange thing is that when I do ping to the IP of the PLC in the port 80, he answers me unless it should be try to open the webserver.

Not which can be the error and I am a little lost, can they help me?

Thank you from already.

P.D. To forgive my English.