[PLC Emails]

Hi

I am using a Vision 280. I am trying to configurate the PLC to send e-mail, but I can't get the SB 150(Ethernet Soc 3 is connected)=1. When using cmd: ping smtp.gmail.com I got 74.125.79.109. Then I configurate the TCP/IP Connect Sock 3 as: 74.125.79.109 and port nr= 25. Then I try to connect, but the SB 150(Ethernet Soc 3 is connected)=0. Is there any one can tell me what wrong.

Thanks beforhand.

Thien

Well, as I see, SB 345 supposed to be an inverted contact as you want to check if "Email send in progress" is off.

[V9.0.1 OS Update failure]

Hi, I got similar troubles with a V130. I am using COM 1 on PC, baudrate of 115,2kbps. I couldn't find any more recent OS for the V130

[8.6.3 and 9.0.1 compatibility]

thats my last question. I'm just wondering about my long term misapprehension.

Since cloning via SD card is possible, I was assuming that this feature was ment to "freeze" a whole oplc's image. So that you could downgrade any more recent oplc to the status of the clone image if you do an upload on it.

[8.6.3 and 9.0.1 compatibility]

Thank you, Ofir. So, for my understanding, updating of boot and BinLib is only required when switching between big release steps (eg. Visilogic v.8. to v.9. or v.7. to v.8. or vice versa). In other case (VisiLogic v.8.1.0.1 to v.8.6.0.1) cloning via SD supposed to work without any complain. Is this correct?

[8.6.3 and 9.0.1 compatibility]

Hi Ofir,

I thought that loading the OS is one of the tasks of cloning itself. I mean, if I'm cloning an oplc programmed with v.9.0.1 (and dedicated OS) into an oplc holding an older OS that oplc will then hold the recent OS because of cloning.

I was also the meaning that this also would be possible in other direction (cloning a oplc programmed by e.g. v.8.6.1 into an oplc holding a more recent OS, then OS of cloned oplc would get downgraded).

Am I wrong?