AAbrams
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by AAbrams
-
-
Yes, this is a safety to keep your hands out of clamp. Right now you've got to press both buttons within a 0.1second window in order to start a clamp. However, once the clamp starts you can release the buttons, which is bad. I want to use a timer to force the operator to keep the buttons engaged. If a button gets released then the clamp should reset and open.
I want to do this without adding new hardware for example a new prox to show the clamp closed.
-
I'm trying to program an operational safety that requires two buttons to be held in for a set length of time and I don't know how to do this in U90. Is there a feature of the timer that I can use, or do I need to write specific logic to compare the start/run condition with the set time?
THanks in advance for any education you might be able to offer.
Regards,
Alan
Logic analogous to "timer timing"
in Jazz, M91 PLCs and U90Ladder
Posted
Yes I want an operator to hold 2 buttons while a clamp engages and I want to do it without adding new hardware.
Right now when the buttons are pushed the logic sets a bit which fires a clamp. Unfortunately I can then remove my hands from the buttons. I want to insert a timer which forces those buttons to be engaged or disengages the clamp.