Jay12
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Jay12
-
-
R Mozes,
I figured out the error, I just clicked NO to update changes to the images, which is the error I was getting. Also, I did update the driver and everything is looking good.
-
Hello,
I am having an issue when downloading to the PLC, I get an error displaying Error 391-Visilogic failed to download images to the PLC. Any suggestions on why I am getting this error?
-
Jay,
How are you connected to the plc? I ask because a while back I had similar problems nothing I did would work. I had my pc on a docking station and connected to the plc through the docking station. I removed the plc from the docking station and connected directly to the plc and was able to download.
Paul,
Thanks for the suggestion. I was using my school's computers to connect to the PLC and not getting results. So I started over and bought a new PC(which I have wanted to buy for the longest) and purchased the serial to usb converter and am now able to communicate with the OPLC. The only problem I have now is an error 391, which is the visilogic not able to download the same images to the PLC.
-
Which model do you have?
Joe T.
Joe T,
I have a Vision 350-35-R2, and I did some reading and I may have the wrong manual shipped to me. The R2 does not have any TC inputs but the TRA22 does. Somehow I got the wrong manual. Anyway I will be using a transmitter for my TC and use an analog input.
-
Hello,
This is probably a silly question, but what jumper setting do I use for a TC input? In regards to npn or pnp input wiring? Also, can I am unsure what the difference is between the two.
Thanks,
-
Hello,
I tried both versions of the visilogic and no luck. I ended up returning the unit and asked for a replacement. I will see how the new one works.
-
Dear Jay,
Such PLC reaction may occurs as a results of incompatibility system files versions in VisiLogic or communication interruption.
Please use the latest VisiLogic V9.0.1 (Download) and try as follow:
1. Turn off the PLC and use it as standalone ( Disconnect expansion ,Ethernet….)
2. Touch and hold the screen
3. Power on while screen touched
4. Touch twice in Bootstrap screen
5. Update the O/S from the web in help menu and download to the PLC by using 115200 baud rate and 2sec time out
6. Download empty application to the controller
I hope it helps!
Hello,
I have tried these steps and I am still unable to update the o/s or boot file. The only thing I can program is the bin lib. When I installed the bin lib with visilogic 8, the screen went from red to black and i still have the "factory boot error" at the top. I am also have trouble with getting to the Bootstrap screen, i do not go into a different screen when in "bootstrap."
-
Hello,
I currently have a VISION 350 series OPLC that came wiyth software version 8.0 and am trying to use the version 9 Visilogic software. When running the wizard to communicate with the OPLC, I check the current information and the OPLC has O/S version 0.0. The OPLC currently displays a red screen and " Factory Boot Boot Error 00.1.003.01" on the top. Has anyone seen this before? Also, I get an error when trying to update the files with the wizzard. I tried to do an advanced upadte but that doesnt work either. Help will be appreciated, Thanks
Jay
-
Ok, just an update on where I am, I can start the download process but then I get an error 0. Any idea?
-
Hello,
Thanks for the reply. I am using Windows XP.
-
Hello,
I am very new to PLC/Ladder logic and I am having trouble comminicating with a VISION 350. I get the error 206 when I try to Download the program onto the PLC.
Thanks
Error 206
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Just an update, I got rid of Communication errors by using the serial to usb connector and updating the driver.