[V1210 problem with touchscreen]

During booting my plc I had pressed screen and I choose option "Boot to factory default".

After that Touch Screen is not working anomore. I can download project, monitor variables but I cant get into diagnostic mode ?

What should I do to activate Touch Screen ?

[V570 - Countdowning]

I bought new V570 plc and after some downloading program to device I have seen countdowning screen (from 10-0) with touch request information

What does it mean - countdown and why I should touch the screen ?

I have VisiLogic 9.01 installed. I started usign VisiLogic from 5.0 version and there no similar problems like that.

There are some new problems. In example: When I touch in info mode on screen in left top corner then the display show me that I pressed button on center position ? Whats wrong with my plc ?

I find on this forum reset procedure which look like this:

Such PLC reaction may occurs as a results of incompatibility system files versions in VisiLogic or communication interruption.

Please use the latest VisiLogic V9.0.1 (Download) and try as follow:

1. Turn off the PLC and use it as standalone ( Disconnect expansion ,Ethernet….)

2. Touch and hold the screen

3. Power on while screen touched

4. Touch twice in Bootstrap screen

5. Update the O/S from the web in help menu and download to the PLC by using 115200 baud rate and 2sec time out

6. Download empty application to the controller

[Trends from sd card]

Can You give me any sample with storing and showing actual and historical trends from sd card ?

[Alarms]

Hello Everybody

How can I automaticly show alarm window when new alarm is logged. I would like to show window when only new alarm occurs but when ale old still active then the window didn't show