prichter

Dear Simon, Have you managed to conern with described problem? I attached the file formerly. Thanks for your kind help in advance. Best regards Peter

Hi Simon, Thanks for your kind reply. Probably the "brute force" initiates the display registers. It was better to send you the whole file as attached. Find it! Thanks for your kind help in advance. Kind regards, Peter GELIN_tolto9.vlp

Thanks. Formerly I tried the SB24, which initializes too. That works, but it seems that it is not very "beautiful" solution, because it forces the PLC to initiate all system variables. I wanted to initiate anly the required ones. The SB300 does not solve the problem unfortunately. I tried to use the display refresh SB (SB31) which did not solve the problem too. Only the SB24. Thanks again, BR Peter

Dear Support Staff, Via the VisiLogic it is possible to reset and initialize the device under the Communication & PC setting tab. Is there any solution to do it via the PCL program? History: Ater entering the correct password to a pre-selected name, the program loads another display. The asterisks appeared as inverse characters and indicated that the password entering is possible. Pressing the ESC button, or power up the module I could get back to the name selection, but after selecting the same or another name the passord fied cannot be modified anymore. Reason(?) I suppose, that is why the HMI password pointer still keeps the last position of the password field. Executing the Initialization & Reset via VisiLogic the PLC works well as in the beginnig. Purpose: I am gonig to write a simple solution to force the user to log in again in case of an certain external events. Thanks for your kind answer in advance. Best regards Peter