[Analog Input]

Hello Emil,

I was getting a reading greater than 512 which is why I said my values were high but I figured it out; I had the jumper set to current instead of voltage =( My apologies. Thank you for your help.

[Analog Input]

Hello,

I recently acquired a sensor that sends a 0-5V analog signal. I figured I could just scale back the standard 0-1023 input range and use 0-512 but my linear output is still very high. My questions are:

1. Can a 0-5V analog sensor be used on a 0-10V analog input?
2. If so, How do you scale the input value in Visilogic?

Any help is greatly appreciated.

Thank you,

Jared

[SSL encryption]

Hello,

I have been using 1and1 with my PLCs and it has been working great. The price is also very affordable.

[Speaking of pop-ups...]

Hi TM:

Here's how you can get the display as a background image:

-Open Remote Access (click the eye glasses and select Remote Access from the menu).

-Locate the display you want to make an image and press Alt+Print Screen.

-Paste the display in a paint program.

-Resize the image to your PLCs resolution. (for a V350 this is 320 x 240).

-Save image as a 256-color bmp.

-Create a new HMI display and add an image.

-fit the image to the size of the display.

-select the image file you created.

The display now has a background image with no functionality that you may place a pop-up window over top of.

Hopefully this helps.

Jared

[Reducing I/O wiring]

I am very satisfied with how the Unitronics controllers cut down on panel wiring by interfacing the PLC and the HMI. I am looking for a similar solution to reduce the amount of time spent wiring inputs and outputs. I have found solutions for other systems that use front adapters to plug into the I/O modules and run pre-assembled cable to the terminal boards. If a product exist for the Unitronics controllers that could accomplish this I would very much like to know about it.