Martin
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Martin
-
-
Thank you Joe,
I've been experimenting with your ladder,
What I need to be able to do is :Keypad entry the time max 24hrs60min60sec to countdown to zero Start when F6 pressed and Stop when F7 pressed to reset I was hoping that when ESC pressed the timer would flash allowing new time to be set by keypad.
I've tried linking timers and counters from the screen but to no avail.
Thanks again Martin.
-
Hi new to this.
I am trying to create a countdown timer.
F6 starts the countdown from a keypad entered number Hours and Minutes.
F7 Pauses timer.
When the timer is in the on state ie. counting down I wish for a relay to be activated.
I'm using a V280 with a V200-18-E2B i/o snap in.
At a later point I'm going to require the total time multiplied by a predetermined
Current reading as a total in milli-amp hours.
I've read just about everything posted about timers but can't seam to find anything
relevant.Attached is my effort.It doesn't work I can change the numeric value of the timer but it won't Start.
Any help would be greatly appreciated.
Thanks Martin
Timer
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Hi Joe thanks for all your trouble not sure that there's any point posting my vlp as it's crap.
I thought that a countdown timer would be simple.
Not so worried about the total at the mo as it will require FB's and not sure how to o/p them as I need to speak to the network manager.
Thanks again Martin