GaelB
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by GaelB
-
-
I already did that but it didn't work... I don't know why it creates those ldb files.
Thing is, the data are stored in the PLC so I don't think I'm using the right method there.
-
It worked !
But now i've got issues trying to export data from the PLC
It does nothing when I open the project with DataXls only file it creates is not excel but .ldb. Why ?
-
Thank you all ! I'll try this tomorrow, i think it should work.
-
1 hour ago, Flex727 said:
You can find the IP address of the PLC in INFO mode. If you are going to communicate with the PLC via Ethernet, you need to set up Ethernet Configuration and assign an appropriate IP address in the ladder.
Thank you. Where is this INFO mode ? Cause I can't find it in DataXport.
-
Hi again !
I tried to set it up but it doesn't work. I need to fill the IP Adress in Communication - PC Settings > Favorites, which IP Adress it is and where can I find it ?
The port number is also automatically set on 20256...
-
Hi, thanks for your message !
I'm using ethernet. In design>pc ports it appear as : "Ethernet(call)" so i guess i should select "TCP/IP(call)" in connection type ?
-
Hello all !
I'm trying to get data from a V1210 using DataXport. When i try to get OPLC information i got this message :
"Communications could not be established due to failure to open port. Port maybe in use by another application or device."
Or this port seems to work perfectly and is not used by other application...
Can somebody help me ?
Regards, Gaël.
Problem connecting with a V1210
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Actually no, i can't run it as administrator, I'll try with my own computer to see if it makes a difference.
@Cam : Here is the file : https://ufile.io/hguwf
I think the problem might be the table i'm using. Is it possible to create my own table, or to get the data without using one ?