["Use Run Idle for O2T" check-box in Ethernet/IP configuration]

Hi  SIMI
The EDS file compiler for EIPscanner does not exist in the unilogic programmer.
I've created global tags from EDS.
You must import global Tags into the program.  File is higher  in this topic - TagsforJXC91.xls
Here are tags for Keyence CVX-400. these are used in Ethernet / IP Scanner settings.
If you want to control Cameras using the implicit commands, watch the video.

https://www.youtube.com/watch?v=b0gMSIwIrcY

Lots of fun

Best regards  Stefan

[Uni-com UAC-02RS2]

Hi,

We in the project used 
1x UAC-01RS2
2x UAC-02RS2
3x USP-104B10 with 3x USC-P-B10
BUS connectors are well connected.
All modules work correctly, including COM modules.
Data Tx and Rx  in com modules also work.
The only error is that, the power LED on the COM modules does not lighting.
The power LEDs on the I / O modules light up well.

Best regards.

 

[Barcode scanner connected to UniStream does not work in]

Hello gentlemen.
I'm glad, you're doing  on this problem .
Connect the cheap barcode reader to the Unistream USB port.
Now I need it in one project.
The USB protocol is very complex and therefore it does not work.
Mr. Alexander your reference to the example:

youtube.com/watch?v=G8bWtpYDt7E

 is super.
In the PC is runing the Hercules program with the com3  port.
Do you know how to connect a PC with Unistream?
More precisely, what RS232 to USB converter is used ? (type).
Now available in stores do not work.
 

Well thank you.

Sorry for my English. (google translator)

 

[Uni-com UAC-02RS2]

Hello.
I connected the Unistream HMI Panel USP-104-B10 with
Uni-com module UAC-02RS2. (2xRS232)
However, the power LED on UAC-02RS2  does not light up or blink.
It's a hardware bug, or I'm doing something wrong.

I use the software Unilogic  version  1.21.51 .
TX RX communication works well on this module.

Does anyone know, how to help me?

[Printing to network printer (PCL)]

Try to look at the example

UnilLogic Example\ Communications\ Ethernet Printer via PCL5

Ahoj.

["Use Run Idle for O2T" check-box in Ethernet/IP configuration]

Hi  Simon.

I'm glad to have helped someone.
We do not have an EDS compilation (electronic data sheet) yet.

I give Global I / O tags for SMC drivers and Keyence Camera.
They can be imported into the project.

TagsforJXC91.xls

[Ethernet/IP to OMRON PLC]

Hi,

In france but maybe it can help.

https://www.youtube.com/watch?v=oP5RQ7BHx5M

or this pdf.

https://industrial.omron.mx/en/media/NX-EIC202_RA_PLC_QuickStart_en_201503_QSG-RA-PLC-NXEIC_tcm871-110543.pdf

 

["Use Run Idle for O2T" check-box in Ethernet/IP configuration]

Hallo,
I'm doing Ethernet IP communication with Keyence Cameras (CVX-400) and SMC motor Drivers (JXC91 series).
Everything works very well, but it took me a long time for SMC drivers to be checked:

                     Use Run idle for O2T.

I would like to ask why and what it means. I did not find explanation in help.
Well thank you.